| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Compound Radius fingerboard with hand tools http://www-.luthiersforum.com/forum/viewtopic.php?f=10117&t=37987 |
Page 1 of 1 |
| Author: | woody b [ Sun Oct 14, 2012 3:32 pm ] |
| Post subject: | Compound Radius fingerboard with hand tools |
| Author: | pullshocks [ Mon Oct 15, 2012 9:54 pm ] |
| Post subject: | Re: Compound Radius fingerboard with hand tools |
Very cool. Time to sharpen up my plane irons and give it a go. Needless to say, I won't be starting with my nice fingerboard blanks. Thanks for posting. |
|
| Author: | Chris Pile [ Mon Oct 15, 2012 10:56 pm ] |
| Post subject: | Re: Compound Radius fingerboard with hand tools |
I always did it by hand with a file and sandpaper. Used a couple radius gages made from cardboard, and checked my work often. When you fretted it and checked the level - you could "adjust", and make it all sweetness and light. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|